First, if you need it, we have it — all the paint for your home — every color you can imagine, in the finish you need for every surface. Second, we’ can help narrow down your choices until you decide on the right paint for your project. Plus, you can reap the benefits of Behr Marquee paint, a Home Depot exclusive. It dries in one hour, only takes one coat. It’s easy to clean and resists dirt and mildew. Of course, our paint associates at your local store can help pick our paint for your home. Pick up some paint swatches or order paint samples online so you can picture what it will look like.
Stucco is a specialized material that requires extensive preparation work (cleaning, caulking, filling in cracks, etc.). Additionally, paint suitable for rolling or brushing over stucco varies greatly depending on location and climate conditions. Some stucco paint varieties will chip and peel away in certain climate conditions, so painting professionals won't recommend them. These factors make stucco one of the more expensive siding materials to cover. You can expect to pay anywhere from $900 (~500 sq. ft.) to $3,000 (~1,500 sq. ft.) to have stucco revitalized with paint, depending on how much is needed to cover the home exterior.

Labor costs for painting vary widely, depending on region, season, type of painting project, and experience level. On an average, you can expect to pay around $50 per hour for house painting projects. However, highly experienced painters can charge up to $70 per hour for specialty projects like murals. A 2,300 sq.ft. single-story home will require around three to five painters to paint the entire house and will take a minimum of five days to complete for a total cost of $2,400-$7,000.
To determine how much paint your house needs, measure the house's perimeter. Then multiply that figure by the height, excluding gable ends. Take the measurements with a steel tape measure, or reel out a ball of twine around the house and mark and measure the twine. If you will use a different paint on your home's trim, subtract 21 square feet for every door and 15 square feet for each typical window. Divide the final figure by the square-foot coverage specified on the can of paint to determine the number of gallons you will need for one coat.

how Much To Paint Contractor

×