For bigger houses or for faster work on smaller ones, rent a high-pressure spray cleaner. This device attaches to your home's water-supply system and puts out a jet of water at a pressure of about 600 pounds per square inch. It is equipped with a handheld wand tipped with a trigger-activated nozzle. The pressure is high enough to dislodge not only stubborn dirt, mildew, stains, and dried-on sea-spray salt, it's enough to remove peeling paint. In fact, if the jet nozzle is held too close to the surface it can even peel off perfectly sound paint, split open shingles, and drill a hole in siding. So follow the manufacturer's directions and wear goggles and protective clothing.
interior House Painting Services
Once you have removed all the loose paint, you should apply an appropriate primer to some of the distressed areas, especially if your paint-removal system has exposed raw wood or bare metal. The kind of primer you use depends on the kind of paint you'll be using later. For latex paint, use latex primers; for solvent-thinned paints, use solvent-base primers; and for metals, use metal primers. Not only do these coatings provide extra protection against the elements, they also form a firm foundation for finishing paints. Also, priming is always required when you're working on new wood.
The authors emphasize ways to maximize profits by anticipating the problems that can quickly turn into expensive mistakes. THe book has extensive step-by-step instructions for planning a painting job and doing the work, whether by brush, spray, or roller. You'll find practical tips, sample forms, examples, and suggestions that can help you set up a painting company, and prevent mistakes in your painting jobs.
how Much Does It Cost To Paint A House
In England, little is known of the trade and its structures before the late 13th century, at which paint guilds began to form, amongst them the Painters Company and the Stainers Company. These two guilds eventually merged with the consent of the Lord Mayor of the City of London in 1502, forming the Worshipful Company of Painter-Stainers. The guild standardised the craft and acted as a protector of the trade secrets. In 1599, the guild asked Parliament for protection, which was eventually granted in a bill of 1606, which granted the trade protection from outside competition such as plasterers.[2]
To determine how much paint your house needs, measure the house's perimeter. Then multiply that figure by the height, excluding gable ends. Take the measurements with a steel tape measure, or reel out a ball of twine around the house and mark and measure the twine. If you will use a different paint on your home's trim, subtract 21 square feet for every door and 15 square feet for each typical window. Divide the final figure by the square-foot coverage specified on the can of paint to determine the number of gallons you will need for one coat.
