For smoothing the edges of scraped spots here and there, you can wrap a piece of sandpaper around a wood block. For larger areas, it's less tiring and more effective to use an electric orbital sander. Move it up and down or back and forth across the surface to remove old paint and smooth rough edges at the same time. Don't use an electric disc sander or a belt sander. Both can leave swirls or dips in the wood that will show through a new coat of paint.
You can use the spray cleaner while working from a ladder -- although scaffolding is better -- but practice at ground level first; the force of the spray against the house could knock you off a ladder if you're not careful. Some of these machines come with separate containers you can fill with cleaning solutions or anti-mildew solutions. Sprayers are so powerful that ordinarily you probably won't need to use a cleaning solution; if you do, remember to rinse the surface with clean water afterward.
You can count on Tru Colors Contracting to be a commercial paint contractor that gets the job done. We can paint the exterior of any building, including your hotel, shopping center, hospital, high-rise, mid-rise, and industrial building. You can trust that the paint job we provide for you will be of the highest quality you can find. Whether we're painting the outside or inside of your commercial building, we will use quality paint that looks beautiful and lasts a long time in any condition. We will be sure to come up with a detailed plan from start to finish to ensure the job is completed on time and within your budget. https://www.youtube.com/watch?v=b6_WEt9k_Hw&feature=kp
Brown denotes a personality that is earthy, realistic and trustworthy. This classic earth tone can be applied to living and work areas alike, as it evokes a feeling of being well-rounded and connected with nature. Terracotta and dark mustard brown combinations are perfect for Latin American and Santa Fe-style décor. Brown hues are great for interior spaces that get a lot of sunlight. Lighter shades of brown, such as beige and taupe, are neutral colors that particularly work well in homes that are being shown to potential buyers.
I agree with you Richard, as a painting contractor for very many years, people are always looking to get more and more out of you. I had to give an estimate to a lady a few weeks ago who had more stuff around her home than a thrift store including heavy furniture, stuff all over the floor and junk everywhere. I knew if I accepted the job id be a furniture mover and cleaner. I also agree this article makes it seem like the contractor is out to rip off the customers. Fact is I always leave doing more work than agreed upon. It doesn't bother me since the customer is always satisfied. Just saying
For smoothing the edges of scraped spots here and there, you can wrap a piece of sandpaper around a wood block. For larger areas, it's less tiring and more effective to use an electric orbital sander. Move it up and down or back and forth across the surface to remove old paint and smooth rough edges at the same time. Don't use an electric disc sander or a belt sander. Both can leave swirls or dips in the wood that will show through a new coat of paint.
As you scrape, you may find that the wood has turned gray or black in some areas. Check for rot by probing these areas with a nail. Spots that are discolored but firm are simply weathered. Weathered wood doesn’t hold paint very well, so sand away the gray surface. If you find soft areas, you’ve got rot. Small, shallow soft spots can be dug out and repaired with a two-part filler such as Minwax High Performance Wood Filler. But when rot is deep and widespread, it’s best to replace the entire piece of wood.
Ask companies to include all details in writing. Although that sounds simple enough, too many contractors submit offers such as "paint house for $5,000." A friendly contractor may offer a reassuring handshake and promise that the crew will take care of all the details — starting on time, working every day, cleaning up, etc. That's great, but why not include each point in the proposal? If it's a challenge to get a written description of labor, materials and other details, things will probably get worse when the work starts.
