With that said, here's the reality of that particular scenario. Painters do put water in the paint, but not for reasons you would think. Some materials need to have their viscosity manipulated in order to slow drying time, allowing gravity to 'smooth' out the product for a better finish. It also prevents 'drags' and 'sausages'. I personally try not to do it too often, but from time to time I have to. I want my client to have a proper finish. painting Brick House Cost
NOTE: Member service professional information confirmed as described above may change or expire over time; while HomeAdvisor attempts to maintain accurate and up-to-date information, and confirms changes when notified, we cannot guarantee that profile and screening information is accurate. Therefore, we recommend that before working with a service professional you verify that information presented is still current and/or acceptable to you. https://m.youtu.be/b6_WEt9k_Hw
I totally agree with this as well. I think every time I have read Angie's List reports, they are inaccurate and not researched enough. I had COMPLETE faith in Angie but lately I am hesitate on reports. I would check your local hardware store or even your neighbors to get a recommendation for painters. If you liked what you saw, you can be stress free with your results. I live in Texas and I have borrowed my hardware store opinion bc that seems to be the place most of the contractors or painters come to buy stuff for the jobs. If your neighbors painters, contractors, electricians and plumbers have shown good results, stress free you. I have been stress free with results, glad I asked for other opinions.Don't forget, the Hardware Store knows if that person is trustworthy and honest, their accounts would be shut down.
To determine how much paint your house needs, measure the house's perimeter. Then multiply that figure by the height, excluding gable ends. Take the measurements with a steel tape measure, or reel out a ball of twine around the house and mark and measure the twine. If you will use a different paint on your home's trim, subtract 21 square feet for every door and 15 square feet for each typical window. Divide the final figure by the square-foot coverage specified on the can of paint to determine the number of gallons you will need for one coat.
