Use spray paint to refinish your old bicycle or give any surface a new finish - glitter, mirror or just a new solid color. A fresh coat of concrete paint on a basement walls can make a huge difference. Protect your garage floors from dirt and stains with an epoxy paint. Don’t forget your bookshelves — douse them with some furniture paint to make them look new, again.
You can use the spray cleaner while working from a ladder -- although scaffolding is better -- but practice at ground level first; the force of the spray against the house could knock you off a ladder if you're not careful. Some of these machines come with separate containers you can fill with cleaning solutions or anti-mildew solutions. Sprayers are so powerful that ordinarily you probably won't need to use a cleaning solution; if you do, remember to rinse the surface with clean water afterward.
A thorough scrubbing is a must before painting any exterior surface. It removes the dirt and broken-down paint residues that keep fresh coats from adhering and gets rid of mildew that grows on paint in all but the most arid climates. Most contractors clean with pressure washers, but in the hands of someone unfamiliar with the equipment, these can gouge wood, shatter glass, and drive water behind siding and trim. Using a hose, a pump sprayer, and a scrub brush is slower but safer, and just as effective.
I've seen this article sent out 4 times now. It's out dated in terms of today's "Scams." Paint stores haven't charged more money for deeper paint colors in over 15 years. Also Water downed paint? Seriously? That would never happen in the real world. And Wall repair? what painter would ever not assume wall repair as included? This article is a waste of time and should be taken down or edited to reflect actual scams of todays times.
To determine how much paint your house needs, measure the house's perimeter. Then multiply that figure by the height, excluding gable ends. Take the measurements with a steel tape measure, or reel out a ball of twine around the house and mark and measure the twine. If you will use a different paint on your home's trim, subtract 21 square feet for every door and 15 square feet for each typical window. Divide the final figure by the square-foot coverage specified on the can of paint to determine the number of gallons you will need for one coat.
