Painters usually find it hard to estimate the cost of prep work accurately. This is because the amount of work required varies greatly from job to job. The more the damage, the greater the amount of prep work required and hence, greater the cost. Dirty walls covered with grease have to be thoroughly cleaned for the new paint to adhere properly. Wood surfaces should be sanded 2 along the grain and dusted clean ($1.80 per square foot). Holes have to be patched up and caulked ($10 per square feet).
Historically, the painter was responsible for the mixing of the paint; keeping a ready supply of pigments, oils, thinners and driers. The painter would use his experience to determine a suitable mixture depending on the nature of the job. In modern times, the painter is primarily responsible for preparation of the surface to be painted, such as patching holes in drywall, using masking tape and other protection on surfaces not to be painted, applying the paint and then cleaning up.[2]
Sand the trim with a fine-grit sanding sponge. Sponges get into crevices where sandpaper can’t go and let you apply even pressure. Then apply the first coat of paint, let it dry at least 24 hours, lightly sand it again for a completely smooth surface, and apply the second coat. After each sanding, vacuum the trim, then wipe it down with a tack cloth to remove the dust.
Your business is your livelihood, and it should look its best. In an age where competition is stiff and business is hard to come by, trust our local painters and renovation experts to complete your business painting or remodel job quickly and efficiently with minimal disruption to your patrons, clients, and guests. Keep up with modern style in your business with our professional finishes and accents, and create a completely one of a kind look for your company’s space that your guests can’t wait to come back to. https://m.youtube.com/watch?v=b6_WEt9k_Hw
Alamo took almost 7 hours (with a 3 hour break) and then when they came back they had no instillation (as in our proposal) for the ceiling I had repaired and found out after, that the insurance company never fixed the roof. So for the last three years wet installation removed as much as possible it was covered in plastic with no instillation. Finally....3 Years later We called Alamo Paint contractors and were pleased with the head Forman and took the proposal ( drywall, paint, new instillation, texturing, plus banister repair). Needless today what normally took a three hour job ( from our last experience), took from 9am-4pm. The banister we also had repaired by his assistant was only a 30-40 min job and that was perfectly done. The texture on the ceiling was so-so only because you can see the drywall tape under the paint. I?m having a new painter fix this so it can at least look better then drywall tape showing. Alamo are very nice, good people skills but poor workmanship considering all that happened.

painting A House


One of the fastest, most effective ways to personalize your living space is with color. Bright, muted, cheerful, elegant—whatever your mood, personality, or preference might be, there’s a paint color to match! Our local Five Star Painting teams specialize in making houses feel like homes through interior and exterior home painting services. If you're looking to transform your home, it's time to contact Five Star Painting. Call (888) 261-3633 for a free estimate, or schedule an appointment online. Let us help you paint your world!


To determine how much paint your house needs, measure the house's perimeter. Then multiply that figure by the height, excluding gable ends. Take the measurements with a steel tape measure, or reel out a ball of twine around the house and mark and measure the twine. If you will use a different paint on your home's trim, subtract 21 square feet for every door and 15 square feet for each typical window. Divide the final figure by the square-foot coverage specified on the can of paint to determine the number of gallons you will need for one coat.

how Much To Paint Contractor

×