When I had my interior painting done, after clearing out all of the furniture, myself, I also removed all of the wall plates in all the rooms to be painted. They were a beige color and probably yellowed. The wall was originally an off white and I had it painted a light-mid grey, so those wall plates would look terrible. After pricing replacement plates, switches and outlets (Would have been way too expensive to replace all of them), I decided to just paint all of the wall plates, switches and outlets (Used just a black gloss spray paint). I sprayed the plates outside and used a small brush on the switches and outlets. It worked out just fine and the blacks plates, etc compliment the wall color. It has been 7 years and the plates, switches, outlets are holding up well.
To determine how much paint your house needs, measure the house's perimeter. Then multiply that figure by the height, excluding gable ends. Take the measurements with a steel tape measure, or reel out a ball of twine around the house and mark and measure the twine. If you will use a different paint on your home's trim, subtract 21 square feet for every door and 15 square feet for each typical window. Divide the final figure by the square-foot coverage specified on the can of paint to determine the number of gallons you will need for one coat.

interior House Paint Colors Pictures


At Supreme Painting, our goal is to provide exceptional quality interior and exterior, residential and commercial painting services. We strive to provide these services in the most timely manner, and with an ongoing comprehensive quality control program.  If you want the best residential house painter or commercial painting contractor, you can count on Supreme Painting.

average Cost Of Painting A House


You are right on with this - why do people leave switch plates on when it's just so easy to take them off? Another thing that happened to us - we had the popcorn ceiling taken off and the ceiling painted white. When the job was done and I later went to change out all the fixtures/fans, they had left every fixture in place, so there was a large patch of popcorn and unpainted ceiling left behind - it just didn't dawn on me to specify that they take those down before scraping and painting. It was kind of a mess.

NOTE: Member service professional information confirmed as described above may change or expire over time; while HomeAdvisor attempts to maintain accurate and up-to-date information, and confirms changes when notified, we cannot guarantee that profile and screening information is accurate. Therefore, we recommend that before working with a service professional you verify that information presented is still current and/or acceptable to you. https://m.youtu.be/b6_WEt9k_Hw


A primer 3 is essentially a protective layer that you apply before the first coat of paint. If you are painting over an already-painted surface, you may be able to avoid a primer 3 altogether by using a 2-in-1 paint and primer product. However, if you are painting a surface that has never been painted before or changing the paint or finish type, it would be a good idea to prepare the surface using a traditional primer 3. Primers 3 should also be used when painting over hard, smooth surfaces like glass or tile. All three types of primers 3, oil-based, latex-based and shellac-based can be used under latex paint.
Every home has details that can be accentuated for amazing looking visual appeal and first impressions.  The key is to not make the wrong details stand out.  Entryways, windows, shutters and other details on the home can be painted to make their design noticeable.  However features such as gutters, downspouts, external air conditioning systems, unevenly proportioned windows and protruding garage doors should not be completed to draw attention to them as this will provide a negative results. https://m.youtube.com/embed/b6_WEt9k_Hw
NOTE: Member service professional information confirmed as described above may change or expire over time; while HomeAdvisor attempts to maintain accurate and up-to-date information, and confirms changes when notified, we cannot guarantee that profile and screening information is accurate. Therefore, we recommend that before working with a service professional you verify that information presented is still current and/or acceptable to you. http://www.youtube.com/v/b6_WEt9k_Hw
Paint gets more expensive as you go from flat to gloss. The difference is usually around $1 per gallon per sheen upgrade. Flat is the cheapest, then matte flat or eggshell, satin, semigloss then gloss. Paint also gets much more expensive the darker it gets. A white or neutral paint color can be as much as $20 less expensive than a deep base red or blue.

cost To Paint 1500 Sq Ft House Interior


I agree with Jeff below, these prices are far below what I see on the market in the Portland Or. area. When one uses the term "paint the house" what exactly does one mean? Any fool can buy an airless paint sprayer and put paint on a house. New homes built with fiber cement siding paint clean and easily but older homes built with wood require much prep work.
basic formula? single color exterior labor only ranges from $0.85 to $0.95 per sq foot as a BASE starting point. Prices go up depending on multiple colors, slope of surrounding areas, multiple stories..etc.Some painters charge per window to mask off. Ive seen $25 a window to $50.  Interiors without flooring can be factored the same way. When you start having to do multiple colors, cut ins, masking, room isolation...etc. the price jumps considerably. I always start with a base of $0.85 a sq foot and figure it out from there. the season plays a major role too. paint and materials are charged separatly and are typically marked up at a minimum of 15%. I always tell clients this. that way they pick the paint out they want and what quality they want as well. Anyways...thats your base. 1250 sq foot home @ .0.95 a ft = $1,187.50 (one color). Pressure washing, Add another $45-$55 per hour. a 1250 sq ft home is not going to take longer than 2-3 hours if its a single story. 
At Southern Painting, we not only do it all, we also do it right. We know there are other painters in Fort Worth, but many of them don’t take the time to do the prep work that we do. Plus, we promise to leave no trace when it comes to your home. We don’t disturb your belongings, so you can feel good about us being in your home. Contact us today to request a free estimate at your property. We look forward to hearing from you!

Painting can be a huge pain. Leaping over piles of furniture and ducking around ladders in your yard for weeks isn’t exactly fun, is it? (Unless, of course, you’re training for a furniture dodging competition.) You only have so much time, and that time is valuable—that’s why we aim to have your painting job done fast. Our painters are fully licensed, insured and bonded. When we say we are the most trusted painting company, we mean it! http://www.youtube.com/e/b6_WEt9k_Hw


Second: all the tricks of the trade in regard to "cheating" customers is for hustlers and cheaters and NOT established businesses. At the end of the project the job should come out looking professionally painted as specified in the contract. A selected color that takes multiple coats that was not calculated by the contractor should cost more money. It's not the fault of the painter.
Alamo took almost 7 hours (with a 3 hour break) and then when they came back they had no instillation (as in our proposal) for the ceiling I had repaired and found out after, that the insurance company never fixed the roof. So for the last three years wet installation removed as much as possible it was covered in plastic with no instillation. Finally....3 Years later We called Alamo Paint contractors and were pleased with the head Forman and took the proposal ( drywall, paint, new instillation, texturing, plus banister repair). Needless today what normally took a three hour job ( from our last experience), took from 9am-4pm. The banister we also had repaired by his assistant was only a 30-40 min job and that was perfectly done. The texture on the ceiling was so-so only because you can see the drywall tape under the paint. I?m having a new painter fix this so it can at least look better then drywall tape showing. Alamo are very nice, good people skills but poor workmanship considering all that happened. https://www.youtube.com/watch?v=b6_WEt9k_Hw&app=mobile

For particularly heavy deposits of paint, heat may be more effective than muscle. One way to apply heat is with an electric paint remover, which is a device with a platelike heating element that "cooks" the paint and has a built-in scraper to pull it off. Wearing heavy gloves, hold the heating element against the surface until the paint sizzles. Pull the remover firmly over the surface. The attached scraper will pull off the cooked paint as you go.


If you are planning to hire a painter to work on an exterior painting project, you are most likely to be charged a fixed rate, which is calculated on the basis of the square foot area to be covered. However, most painters charge by the hour for interior projects. Depending on the location, size and nature of the project, season, and the painter’s experience, the labor costs around $50 per hour for a standard painting job.

Using the right software makes your job much easier and helps you get the best possible results. You can easily find the right paint combinations to please your client and quickly order the paint from a nearby store. A good field service management application, such as mHelpDesk, allows all departments of your business to smoothly coordinate their efforts, eliminating wasted time and producing happy customers.
Professional painters provide estimates primarily based on the square footage of your home. Painting an average home between 500 and 1,500 square feet can cost between $1,000 and $3,000. However, factors such as number of stories and ease of access can also affect the overall price. Homeowners report that the average cost to paint a house nationally is $2,581 and most pay between $1,714 and $3,682. 

house Painters Near Me

×