Yes the pricing does change, and quite significantly. I have worked inside the paint industry on counter sales outside sales and application for over 10 years. One thing many people do not understand is, the resins in the paint are more expensive to produce the higher the sheen goes. Therefore the company is at of higher cost making the paint, which in terms they charge more for the paint. I have seen a 15$ variance between flat-semi-gloss it is not uncommon and is not unrealistic to pay more for a higher sheen. Another thing to add is when doing samples on your wall prior to a painter coming is a good idea, however do not do them in huge squares with heavy coats, remember you are just wanting an idea. A lot of times the issue comes up of the paint not covering the sample coats, in fact it is covering quite well, however the paint sample applied is often times much darker than the wall color, creating a contrasting difference from the lighter surrounding wall and the sample placed on the wall. I recommend getting a piece of sheet rock and using it for the samples so you can move around with it etc.
I'm an architect and my firm routinely specifies interior finishes for projects so I thought I'd contribute a professional's perspective on the issue of how many coats of paint are deemed "acceptable". The fact of the matter is the average consumer usually isn't a paint expert and can't be expected to know about all the factors that impact coverage. That knowledge is considered "means and methods" and in a court of law, the responsibility lies with the painter or general contractor, not the consumer. What the consumer should be concerned about is the final result-does it look good and is it what you expected? The simplest way to communicate this to your painter is to stipule in your written agreement that the number of coats will be "as required to cover". That way all the guess work about what kind of primer, how many coats, how color affects the scope of work, etc., is removed from the consumer's responsibility and resides where it belongs-with the professional. In the contract that's why retention is always a good idea-typically 10% is withheld from payment until the job is completed to the satisfaction of the customer. Of course in return you as the customer have to be reasonable about what constitutes a completed job. Just my $.02.
The only time it's acceptable to mix water in the paint is when you're using a deep or ultra deep base paint to reduce its stickiness, which is rare with new paint technology. Dark primary colors are composed almost entirely of tint that makes it very hard to work with without adding water. (You never use a sprayer and need to thin paint.?) If i was still in the industry I'd take the time to make a better article than this. Take this for a grain of slat. Use a reputable painter or someone you know you can trust or has been referred to you by someone you trust. I wouldn't hire anyone I had to watch like a hawk to make sure they're not screwing me.
We know that homes require proper surface preparation to protect them from the weather. Creation Painting has the expertise to take care of your home properly. Our team of meticulous exterior painters are experienced in handling detailed prep work including pressure washing, wood repairs, replacement of rotten wood, substrate issues and any other challenges that might be part of what’s involved in the painting of your home’s exterior.
painting A House Cost
Some contractors work on time and material others on a firm contract. I would never hire the former and am leary of the latter. A contractor may low-ball a bid to get the job planning to make a killing on change orders. If you say good morning to them, they charge you extra for that. If the contract is not very, very specific and extensively fleshed out or if they display their change order schedule prominently on top, show them the door.
To paint a large section without leaving lap marks, roll the nearly dry roller in different directions along the dry edge, feathering out the paint as you go. After completing the entire length of the wall or ceiling, move to the next section and paint over the feathered edges. For the second coat, apply the paint in the opposite direction. This crisscrossing paint application sharply reduces (if not eliminates) lap marks.
