The companies with the best paint products are Benjamin Moore, Dunn Edwards, Sherwin Williams, and Vista Paint. As a painter I don't recommend Berh from Home Depot as much because it's quality is just marketing. Flat paint has no sheen and it shows its true color, but is not easy to wash or clean. Satin, eggshell have low sheen and is washable. Semigloss ang glossy has a high sheen and these paints are recommended for bathrooms and kitchen or where there's high humidity and steam. http://m.youtube.com/e/b6_WEt9k_Hw
The walls must be properly cleaned prior to applying primer or paint. This involves using a mixture of soap and water. Nail holes, chips, cracks or other small imperfections should be filled in and evened with plaster and allowed to dry before the entire surface is lightly sanded down and wiped again. Once the wall is clean and dry, you should apply painter’s tape over surfaces you do not want painted. Be sure not to overlook ceiling corners and edges, baseboards and trims and moldings.
house Outer Painting Exterior Painting
The cost to paint a room will vary based on the size of the room, the type of paint you select, any ceiling or trim work needed, and any repairs needed. If no repairs or other additional work is needed, painting a room with contractor-grade paint could range from $1 to $2 per square foot, including materials. Selecting a luxury paint (some cost more than $100 per gallon) will certainly increase your house painting costs. Here are some additional examples of average house painting costs, per room:
When painting the trim, you don’t have to be neat. Just concentrate on getting a smooth finish on the wood. Don’t worry if the trim paint gets onto the walls. You’ll cover it later when painting the walls. Once the trim is completely painted and dry (at least 24 hours), tape it off (using an “easy release” painter’s tape), then paint the ceiling, then the walls.
The cost to paint metal siding -- most commonly aluminum and galvanized steel -- will depend on a variety of factors. In some instances, a simple cleaning will suffice to prepare metal siding for painting. In worst cases, painting professionals will need to repair metal that is rusted, damaged or missing pieces due to climate conditions. In the case of severe damage, a professional will have to remove the old finish and paint to get to the original layer, which will add on to the final price. When you add the actual painting of the metal siding, you might be looking at a final bill between $400 (~250 sq. ft.) and $1,500 (~1,000 sq. ft.).
NOTE: Member service professional information confirmed as described above may change or expire over time; while HomeAdvisor attempts to maintain accurate and up-to-date information, and confirms changes when notified, we cannot guarantee that profile and screening information is accurate. Therefore, we recommend that before working with a service professional you verify that information presented is still current and/or acceptable to you.
For interior paint I prefer the semi-gloss, provides a very subtle sheen and is super easy to clean -no flaking, chipping, etc. I've painted a lot, and found that Sherwin Williams Ovation paint has been the easiest to use, and provides the best coverage. I even painted my ceilings with it and WOW! I was done it no time at all, with perfect coverage.
basic formula? single color exterior labor only ranges from $0.85 to $0.95 per sq foot as a BASE starting point. Prices go up depending on multiple colors, slope of surrounding areas, multiple stories..etc.Some painters charge per window to mask off. Ive seen $25 a window to $50. Interiors without flooring can be factored the same way. When you start having to do multiple colors, cut ins, masking, room isolation...etc. the price jumps considerably. I always start with a base of $0.85 a sq foot and figure it out from there. the season plays a major role too. paint and materials are charged separatly and are typically marked up at a minimum of 15%. I always tell clients this. that way they pick the paint out they want and what quality they want as well. Anyways...thats your base. 1250 sq foot home @ .0.95 a ft = $1,187.50 (one color). Pressure washing, Add another $45-$55 per hour. a 1250 sq ft home is not going to take longer than 2-3 hours if its a single story.
My painter franchisee, who I got from Angie's List, must have found some shmucks on the corner to paint my house. I specifically said I wanted stain. First my house was painted the wrong color, Then it was painted with LATEX paint- not stain. Estimates to 'undo' the damage is around $10,000 and its not a guarantee that it will work. The work is at best amateurish. Many underpainted or not painted spots, drips, etc. They did the entire outside (scraping?, priming? caulking?, painting), cleaned up and left within the time I left for work and came home. There were thee of them (my neighbor told me) This was two years ago and I am still upset. Can't be fixed.how Much Are House Painters
