To get at the nails in the board above, shove a flat pry bar up under it and gently pry the board outward. In most cases, this will pop up the nailhead, so you can pull it with your hammer claw. If you run into a stubborn nail that won’t move easily, don’t use brute force and risk splitting the good board. Instead, slip a hacksaw blade behind the siding and cut the nail (Photo 2).You can’t get the new board in unless you pull the remaining shank of the cut nail (Photo 3).
Thorough preparation is essential to ensure a good finish. Contractors might have to fill cracks or holes and remove old paint if it is badly worn, peeling or flaking. They remove all paint and apply a suitable primer to the bare surface. If the existing paint is in reasonable condition, they clean it and rub it with abrasive material to provide a key for the new paint. On new surfaces, such as bare wood or fresh plaster, they apply a suitable seal, followed by a primer coat.
Trees, bushes, and ornamental shrubs can also get in the way of your painting. Prune any branches that hang over the house or brush up against walls. Evergreen trees and tall bushes growing close to the house can be wrapped with canvas drop cloths. Tie one end of a rope around the trunk at least halfway up. Pull the top of the tree out and away from the house, and tie the other end of the rope to a stake placed farther out in the yard. Cover smaller shrubs, flower beds, sidewalks, and driveways with drop cloths to protect them from paint drips and spills.
Tony and Travis came to the house to give me an estimate and were able to come back on two day's notice to do a wallpaper removal job for me. They stripped the paper, patched and primed in 1 day and were very clean and efficient. They were very willing to answer all my questions and even helped me with an unrelated paint issue. These guys are top notch! I'll definitely be calling them back for my future projects!
Ask companies to include all details in writing. Although that sounds simple enough, too many contractors submit offers such as "paint house for $5,000." A friendly contractor may offer a reassuring handshake and promise that the crew will take care of all the details — starting on time, working every day, cleaning up, etc. That's great, but why not include each point in the proposal? If it's a challenge to get a written description of labor, materials and other details, things will probably get worse when the work starts. https://www.youtube.com/watch?v=b6_WEt9k_Hw&feature=youtube_gdata
To determine how much paint your house needs, measure the house's perimeter. Then multiply that figure by the height, excluding gable ends. Take the measurements with a steel tape measure, or reel out a ball of twine around the house and mark and measure the twine. If you will use a different paint on your home's trim, subtract 21 square feet for every door and 15 square feet for each typical window. Divide the final figure by the square-foot coverage specified on the can of paint to determine the number of gallons you will need for one coat.how Much To Paint Contractor
