FIRST: Unless you can stay in business painting 1 bedroom at a time for $500-$1000, which you can't, then you will be taking on several thousand dollar contracts that require thousands in Labor and Materials to fulfill the order. Multiply that by 3-4 jobs at one time or in our case 15-20 jobs at a time, YOU NEED TO TAKE DEPOSITS!!! It is horrible business not to take deposits. There are many jobs where its not possible to get a deposit and that is built into or pricing accordingly. If we are not getting a deposit, there is a finance charge built in, contractors are not banks. If you don't have a good feeling about a deposit, your hiring the WRONG CONTRACTOR. Hire people you know or well established businesses.
I'm an architect and my firm routinely specifies interior finishes for projects so I thought I'd contribute a professional's perspective on the issue of how many coats of paint are deemed "acceptable". The fact of the matter is the average consumer usually isn't a paint expert and can't be expected to know about all the factors that impact coverage. That knowledge is considered "means and methods" and in a court of law, the responsibility lies with the painter or general contractor, not the consumer. What the consumer should be concerned about is the final result-does it look good and is it what you expected? The simplest way to communicate this to your painter is to stipule in your written agreement that the number of coats will be "as required to cover". That way all the guess work about what kind of primer, how many coats, how color affects the scope of work, etc., is removed from the consumer's responsibility and resides where it belongs-with the professional. In the contract that's why retention is always a good idea-typically 10% is withheld from payment until the job is completed to the satisfaction of the customer. Of course in return you as the customer have to be reasonable about what constitutes a completed job. Just my $.02.
Before the scrubdown, protect nearby plants by misting their leaves and saturating the surrounding soil with water, pulling them away from the house, and shrouding them in fabric drop cloths. (Plants will cook under plastic.) Lay more drop cloths along the base of the walls to collect any falling paint debris. Walls should be wet down before getting scrubbed, then washed with a gallon of water mixed with 1 cup chlorine bleach and 1 cup of either a concentrated, phosphate-free cleaner, such as a trisodium phosphate (TSP) substitute, or Jomax House Cleaner. Working in sections, from the bottom to the top, will avoid streaks. Be sure to rinse walls well before the solution dries. Wood siding and trim should be ready to paint after a day or two of dry weather. http://www.youtube.com/v/b6_WEt9k_Hw&feature=share
One of the most popular painting applications in the industry, ColorSnap suggests colors that will work in at your job site. Simply take a picture of the room, entryway or whatever else, and the software will find up to eight colors that will create a beautiful space. In addition, the program will suggest coordinating colors and help you locate the nearest Sherwin-Williams store.
The easiest way to choose a color scheme is to look through color catalogues or at paint samples. Most hardware stores and paint depots keep catalogs handy for customers to take home. Painters should take their time looking at the spaces in these catalogs and comparing colors to their existing floors, carpets, curtains, blinds, furniture and decorations. It’s important to look at fabric and upholstery first and then look at the other aspects to see if they coordinate with your color choices. Consider the prominent color in this coordination for the walls.
If you do decide to make it a full-time business, the sky’s the limit. The house flipper/contractor that I worked for billed clients $35 per hour for painting, and paid his best painters perhaps half of that, so there is room for some profit there. Consider the case of Matt Shoup, who started with $100 and went door-to-door, asking neighbors if they needed some painting done, then built a painting business that earns $2.5 million per year!
NOTE: Member service professional information confirmed as described above may change or expire over time; while HomeAdvisor attempts to maintain accurate and up-to-date information, and confirms changes when notified, we cannot guarantee that profile and screening information is accurate. Therefore, we recommend that before working with a service professional you verify that information presented is still current and/or acceptable to you. https://m.youtu.be/b6_WEt9k_Hw
This all comes down to the rules.....1. references....does the contractor have them??? I ALWAYS furnish all my prospective customers them....no excuses...2. insurance....again, I always furnish proof....3. Read the proposal carefully...I ALWAYS list materials down to tape used, the brand, the grit of sandpaper, the manufacturer, etc....its INEXCUSABLE to not list all of these items....I am a member of the PDCA, the Painting and Decorating Contractors of America, the foremost authority in the coatings industry and they also approve of what I listed....if you do not follow these guidelines, you will NOT get a job reflective of "professional". Look for the PDCA where any painting contractors are, if they are not a member, RUN!
exterior House Painting Near Me
We’d love to discuss your interior painting needs and provide a cost estimate and plan to meet your dreams. At Home Painters Toronto our goal is your 100% satisfaction. We deliver a professional end result you can be proud of, so we can be proud of it too. Our professional painting crew will make your interior painting project seamless and easy for you. Let us do our job, so you don’t have to. https://youtube.com/watch?feature=youtu.be&v=b6_WEt9k_Hw
Lap marks are those ugly stripes caused by uneven layers of paint buildup. They occur when you roll over paint that’s already partly dry. (In warm, dry conditions, latex paint can begin to stiffen in less than a minute!) The key to avoiding lap marks when doing DIY wall painting is to maintain a “wet edge,” so each stroke of your roller overlaps the previous stroke before the paint can begin to dry.
house Interior Design
Painting your home, both inside and out, improves its curb appeal, character and resale value. Painting is one of the quickest and easiest ways to give your home a face-lift -- and it yields some of the most dramatic results as well. If you have ever visited the painting section of your local hardware store, you know how overwhelming the multitude of paint choices can be. In addition to colors, there are finishes, stains, maintenance and other options to consider. And, if you're interested in adding a mural or trompe l'oeil, you're looking at a whole different set of choices and associated costs.
Lap marks are those ugly stripes caused by uneven layers of paint buildup. They occur when you roll over paint that’s already partly dry. (In warm, dry conditions, latex paint can begin to stiffen in less than a minute!) The key to avoiding lap marks when doing DIY wall painting is to maintain a “wet edge,” so each stroke of your roller overlaps the previous stroke before the paint can begin to dry.
You can typically complete all of these preparations for an entire house in a single day or over a weekend. If you're painting a porch or an outbuilding, it may only take an hour. If you're painting with latex, you can start the following day; solvent-base paint does not adhere well to moist surfaces so wait several days until all the washed surfaces are absolutely dry before applying this type of paint.
house Painting Near Me
Beginning with the prep work and ending with last coat of paint or the finishing, an exterior paint job will last anywhere from one to two weeks. After completion, homeowners using low-quality paint will need to repaint every four or five years to keep it well maintained; homeowners using high-quality paint can go longer without a new coat -- usually about seven or eight years, depending on the type of paint and material.
Every home has details that can be accentuated for amazing looking visual appeal and first impressions. The key is to not make the wrong details stand out. Entryways, windows, shutters and other details on the home can be painted to make their design noticeable. However features such as gutters, downspouts, external air conditioning systems, unevenly proportioned windows and protruding garage doors should not be completed to draw attention to them as this will provide a negative results.
Use a wire brush and a wide-blade putty knife to remove small areas of defective paint. Scrub under the laps of clapboard siding as well as on downspouts and gutters. For speedier work on metal, a wire brush attachment on an electric drill will remove rust and paint with less effort. For more extensive paint removal, invest in a sharp pull scraper -- a tool with a replaceable blade that's capable of stripping old paint all the way down to bare wood with a single scrape. Hold the scraper so the blade is perpendicular to the wood, apply moderate to firm pressure, and drag it along the surface. Keep the blade flat against the wood so it doesn't gouge the surface.
wall Painting Ideas
To bring classic beauty to all of your To bring classic beauty to all of your home's interior walls choose BEHR Premium Plus Ultra Interior Matte. This traditional matte paint will create a low-reflective appearance that's perfect for all of your home's rooms. It's also great for hiding minor flaws dents and nicks. Get the beautiful color you ... More + Product Details Close
Hi Donnie, Thanks for your comment! We would be happy to help you connect with a fencing pro to give you an estimate on your project. You can submit a request to our pros here: www.homeadvisor.com, browse a list of local pros here: http://www.homeadvisor.com/c.html, or send your info to [email protected] and a project advisor will reach out to assist you. –HASupport
To determine how much paint your house needs, measure the house's perimeter. Then multiply that figure by the height, excluding gable ends. Take the measurements with a steel tape measure, or reel out a ball of twine around the house and mark and measure the twine. If you will use a different paint on your home's trim, subtract 21 square feet for every door and 15 square feet for each typical window. Divide the final figure by the square-foot coverage specified on the can of paint to determine the number of gallons you will need for one coat.
