When the primer is dry, caulk all small joints (less than ¼-inch-wide) in the siding and trim. Most pros use siliconized acrylics—paint won't stick to straight silicones—but Guertin and O'Neil like the new, more expensive urethane acrylics for their greater flexibility and longevity. O'Neil stresses that it's shortsighted to skimp on caulk. "If the joint fails, you're back to square one." Guertin uses the lifetime rating as his quality guide. "I don't expect 35-year caulk will last 35 years, but it should last longer than a 15-year caulk."
For most people, their home is their most valuable asset, which is why it needs to be painted exclusively by professionals. Think about it; you wouldn’t paint your car, so why would you consider painting your home? Rather than putting your most valuable asset at risk, not to mention your own safety and well-being, trust the Fort Worth painters of Southern Painting to get the job done quickly, safely, efficiently, and properly.
Interview your contractor.Before you choose a contractor, get three bids for comparison and ask the right questions. Bunting says you need to know the following: Do they have proper licenses, insurance, and bonding? Do they subcontract the work out? Do they offer written guarantees of their work? “Recommendations from friends and family are always a good measure,” adds Rance. “And ask for references from previous customers.”
To determine how much paint your house needs, measure the house's perimeter. Then multiply that figure by the height, excluding gable ends. Take the measurements with a steel tape measure, or reel out a ball of twine around the house and mark and measure the twine. If you will use a different paint on your home's trim, subtract 21 square feet for every door and 15 square feet for each typical window. Divide the final figure by the square-foot coverage specified on the can of paint to determine the number of gallons you will need for one coat.
