If the point of hiring a well established, experienced, reputable painting contractor is to secure the professionalism and trust suggested to be inherent with that choice, then I would EXPECT that professionalism and experience to include the ability to make the proper and correct calculations for labor and materials for a fixed price quote, and there should be NO reason for the contractor to put the cost burden of their miscalculation on the consumer.

When determining the total cost of a home exterior paint project, you'll want to include the cost of materials like paint, supplies and other items you might want to cover in addition to the siding. If you know the average cost of these items in addition to your home exterior project cost, you'll have a good plan in place when you start calling for professional estimates. This also gives you the option to purchase or paint some items yourself to save money. Here are some of those cost factors and what you might expect to pay:
When coverage is difficult to estimate, add more rather than less when doing DIY wall painting. You can always pour the leftover back into cans. For large jobs, use the bucket and a roller screen rather than a roller tray. It’s much faster to load your roller with the screen than to use a roller pan. Simply dunk the roller into the paint bucket, then roll it along the screen until it stops dripping.
Freshly painted walls often look blotchy. The color is uniform, but the sheen isn’t consistent. This usually occurs over the holes and cracks you patched with a filler or drywall compound. The porous fillers absorb the paint, dulling the surface (a problem called “flashing”). When light hits these dull spots, they stick out like a sore thumb. The smooth patch also stands out in contrast to the slightly bumpy texture of the rest of the wall. A quick coat of primer is all it takes to eliminate flashing and texture differences.

lowes Home Improvement Near Me


I'm an architect and my firm routinely specifies interior finishes for projects so I thought I'd contribute a professional's perspective on the issue of how many coats of paint are deemed "acceptable". The fact of the matter is the average consumer usually isn't a paint expert and can't be expected to know about all the factors that impact coverage. That knowledge is considered "means and methods" and in a court of law, the responsibility lies with the painter or general contractor, not the consumer. What the consumer should be concerned about is the final result-does it look good and is it what you expected? The simplest way to communicate this to your painter is to stipule in your written agreement that the number of coats will be "as required to cover". That way all the guess work about what kind of primer, how many coats, how color affects the scope of work, etc., is removed from the consumer's responsibility and resides where it belongs-with the professional. In the contract that's why retention is always a good idea-typically 10% is withheld from payment until the job is completed to the satisfaction of the customer. Of course in return you as the customer have to be reasonable about what constitutes a completed job. Just my $.02.
The companies with the best paint products are Benjamin Moore, Dunn Edwards, Sherwin Williams, and Vista Paint. As a painter I don't recommend Berh from Home Depot as much because it's quality is just marketing. Flat paint has no sheen and it shows its true color, but is not easy to wash or clean. Satin, eggshell have low sheen and is washable. Semigloss ang glossy has a high sheen and these paints are recommended for bathrooms and kitchen or where there's high humidity and steam. http://m.youtube.com/e/b6_WEt9k_Hw
If we’re being honest, exterior house painting is a backbreaking task when you go it alone. Between vertigo inducing ladders, sanding down old paint, washing off dirt and taking caution not to paint the windows, there is a lot to think about. Our team of professional house painters make it easy. We are equipped with the right tools and training to get your house painting project carried out without a hitch.
The cost to paint metal siding -- most commonly aluminum and galvanized steel -- will depend on a variety of factors. In some instances, a simple cleaning will suffice to prepare metal siding for painting. In worst cases, painting professionals will need to repair metal that is rusted, damaged or missing pieces due to climate conditions. In the case of severe damage, a professional will have to remove the old finish and paint to get to the original layer, which will add on to the final price. When you add the actual painting of the metal siding, you might be looking at a final bill between $400 (~250 sq. ft.) and $1,500 (~1,000 sq. ft.).
Depending on just how dirty the outside of your house is and on the house's size, there are two ways to approach this job. If you live in an average-size house, use a garden hose with a carwash brush attachment to bathe the big areas. For caked-on dirt, use a scrub brush or a sponge and a pail of warm water with a good, strong household detergent in it. Work from the top down, and rinse all areas where you scrubbed with water.
When you go to the home improvement store, find out how much 12 gallons of the paint you want would cost, and that will help you determine your cost. Maybe it's a low-quality paint that costs $30, in which case you're looking at about $360 for paint. If you choose high-quality paint that costs around $70, your total paint cost could be closer to $840. Professionals also recommend that you add an extra 10 or 20 percent to your total square footage, depending on the type of siding you have. Some textures require extra paint because they're rough. This is especially true with wood and stucco siding.

It takes time, skill and experience to produce results that are beautiful and guaranteed to last.  We’ll provide fair pricing for your project after meeting with you and listening carefully – our proposal will be detailed and our pricing transparent – and our pricing will also reflect our commitment to our employees, to run a legitimate company offering appropriate benefits, to attract and retain talented and successful painters.
The materials of the home’s facade should be considered before painting your home. When painting flat surfaces like siding or wood, you can opt for standard outdoor paint. When painting a textured surface like stucco or brick, “elastomeric” paint is a much better choice. This type of paint can stretch more than normal paint, which allows it to bridge over small gaps and crevices, painting smoothly over texture. https://youtube.com/watch?v=b6_WEt9k_Hw&app=desktop
Picking paint colors with SureSwatch is a great Picking paint colors with SureSwatch is a great way to confidently choose the right paint color. Simply choose your paint samples paint the SureSwatch sheet and place the painted SureSwatch on your wall. SureSwatch is a removable paintable clear film that accurately depicts your paint color. SureSwatch is accurate like ...  More + Product Details Close
Once you’ve picked the perfect color, you still have to decide on what type of paint you want for the space. Whether you’re looking for an elegant, refined finish or a material that will wipe clean after an impromptu mural from your little one, there are paint types to suite every situation. When it comes to selecting interior paints, several popular options include:

house Paint Color Combination


When you refinish your existing cabinet doors, you get a whole new look without the astronomical costs normally associated with a kitchen remodel. It’s a much smarter way to update your space, especially if your cabinets are still in good condition. It doesn’t make sense to throw out perfectly good materials, just because you’re tired of the color.
For particularly heavy deposits of paint, heat may be more effective than muscle. One way to apply heat is with an electric paint remover, which is a device with a platelike heating element that "cooks" the paint and has a built-in scraper to pull it off. Wearing heavy gloves, hold the heating element against the surface until the paint sizzles. Pull the remover firmly over the surface. The attached scraper will pull off the cooked paint as you go.

home Painting Design


First off, the picture on the top THAT IS A HOME OWNERS PAINT JOB. If you here a school kid or your neighbor, this is what you get. I was a painting contractor for the better part of 40 years and never saw a PAINTER (even the worst painter) leave a mess like that. Maybe the electrician or the carpenter but, that is not something a painter could even do if they tried.

dulux Home Painting Service

×