Next, undercut the trim to create a gap (Photo 3). When you’re done, scrape any dirt or gunk out of the gap with a putty knife and blow out the dust using a vacuum or air compressor. To avoid staining the concrete, run at least three layers of masking tape under the wood. Apply repellent to all bare wood (Photo 4) including the underside (Photo 5). Bend a putty knife in a vise to make a handy tool for reaching into tight areas. Remove the tape right after application.
I am in northern Nevada and you have not yet gotten sufficient responses to provide a painting cost chart showing the averages.  I do have a quote from an outside (Not Homeadvisor referral) painter who is local for $2,750 for soffits, patio cover and posts, Garage facia (redwood clapboard above (~300 ? Sq. Ft.) on a 2046 Sq. Ft. home where the walls are 9 ft tall and it is fully stuccoed with plastic stucco surfaces, so not being painted.  
The PPG logo is a registered trademark and Colorful Communities and We protect and beautify the world are trademarks of PPG Industries Ohio, Inc. © 2019 PPG Industries, Inc. All Rights Reserved. | Legal Notices & Privacy Policies | CA Transparency in Supply Chain Disclosure | Global Code of Ethics | TISC for PPG Architectural Coatings UK Limited | TISC for PPG Industries (UK) Limited | PPG Industries UK Ltd 2017 Gender Pay Gap Report
I hired this person because he was listed on Angie's List. This man claimed he took and passed his contractor's license test after he signed me up for a project (Feb.) that included fixing cracks, painting, repairing a gate, installing a screen door, etc. He said he would charge me the original "handyman" prices. He postponed the start date, brought one worker who fixed a few cracks, repainted the gate terribly, but ruined a dining room ceiling when his worker used silicone in a tube instead of the expansion tape, spray ceiling covering, and paint I had purchased saying this silicone was "better". Then they said they would have to paint the whole ceiling and charge extra. They left holes in the walls and did a sloppy paint job in several places. I just paid them to get them out of my home as I felt intimidated as a senior citizen who is handicapped. I will try to have the main guy come back when I let him know what I need redone. Don't know if he will come back without charging me more.
Freshly painted walls often look blotchy. The color is uniform, but the sheen isn’t consistent. This usually occurs over the holes and cracks you patched with a filler or drywall compound. The porous fillers absorb the paint, dulling the surface (a problem called “flashing”). When light hits these dull spots, they stick out like a sore thumb. The smooth patch also stands out in contrast to the slightly bumpy texture of the rest of the wall. A quick coat of primer is all it takes to eliminate flashing and texture differences.
For particularly heavy deposits of paint, heat may be more effective than muscle. One way to apply heat is with an electric paint remover, which is a device with a platelike heating element that "cooks" the paint and has a built-in scraper to pull it off. Wearing heavy gloves, hold the heating element against the surface until the paint sizzles. Pull the remover firmly over the surface. The attached scraper will pull off the cooked paint as you go.
Not only careful communication is essential, but we would greatly recommend, when you pick out your type and brand of paint that you go and pay for it, with the contractor's discount, which is given by Sherwin-Williams and most paint companies. Then you will know how much paint you purchased and the coverage. If it is possible, inspect the work of the painter daily.
When selecting a color scheme for the home’s exterior homeowners can choose color options that will correct flaws that they may feel exist with their home and property.  Some examples include utilizing two shades of a single color to make a home appear appropriately sized when the home may be too large or too tall.  To accomplish this effect individuals will want to place the darker tone on the upper level of the home’s exterior.  Smaller windows can appear more proportionately sized by trimming them in a lighter tone of paint.  Darker colors make a space or feature appear smaller.  The same effect can be obtained for homes positioned further away from a curb.  By using lighter tones the home will not feel camouflaged.
×